Acquire:ccdf:frame:current - Keysight 8990B Programming Manual

4 ACQuire Subsystem

ACQuire:CCDF:FRAMe:CURRent?

This query returns the CCDF frame of the running CCDF triggered sweep.
Syntax
Example
ACQ:CCDF:FRAM:CURR?
Remarks
– This query is only applicable for channels 1 and 4. If you send this query for a
– This query is only applicable in the CCDF acquisition mode. If the acquisition
– This query is only applicable when the CCDF sweep is set to the triggered
94
ACQ :CCDF
channel other than 1 or 4, error 700,"Applicable to channel 1 and 4 only" will
occur.
mode is not set to CCDF, error –221,"Settings conflict;Requires CCDF mode to
be enabled" will occur. Refer to
page 132 to set the acquisition mode.
mode. If the CCDF sweep mode is not set to triggered, error –221,"Settings
conflict;Requires CCDF sweep to be in triggered mode" will occur.
:FRAM
:CURR
Queries the frame of the running CCDF triggered
sweep.
"ACQuire:MODE <character_data>"
Keysight 8990B Programming Guide
?
on