Measure:droop? Chan{1|4 - Keysight 8990B Programming Manual

MEASure:DROop? CHAN{1|4}

This query returns the droop measurement result for the selected droop
measurement source.
Syntax
MEAS
Example
MEAS:DRO?
Remarks
– If the droop measurement mode is not enabled
– This query is only applicable for channels 1 and 4. If a channel other than
– This query is only applicable in the Normal and Zoom mode. If this query is
Keysight 8990B Programming Guide
Space
:DRO
?
<boolean>) when sending this query, error –221,"Settings conflict;Requires
droop measurement to be enabled" will occur.
channel 1 or 4 is specified, error 700,"Applicable to channel 1 and 4 only" will
occur.
sent in the CCDF mode, error –221,"Settings conflict;Not Applicable to CCDF"
will occur.
CHAN 1
4
Queries the droop measurement result for the
selected droop measurement source.
MEASure Subsystem
(ACQuire:DROop[:STATe]
9
229