Wmemory{1|2|3|4}:Display <Boolean - Keysight 8990B Programming Manual

20 WMEMory Subsystem
WMEMory{1|2|3|4}:DISPlay <boolean>
This command turns on or off the waveform trace display of the specified memory
slot.
Syntax
WMEM
Example
WMEM2:DISP ON
Remark
If no waveform data exists in the selected memory slot, error –221,"Settings
conflict;No data in waveform memory slot" will occur.
Query
WMEMory{1|2|3|4}:DISPlay?
This query enters a 1 or 0 into the output buffer indicating the state of the
waveform trace display of the specified memory slot.
– 1 is returned when the waveform trace display is turned on
– 0 is returned when the waveform trace display is turned off
Query example
WMEM3:DISP?
500
1 :DISP
2
3
4
This command turns on the waveform trace display of
memory slot 2.
Queries whether the waveform trace display of memory slot
3 is turned on or off.
Space
0|OFF
1|ON
?
Keysight 8990B Programming Guide