Table of Contents
Advertisement
14
LIMIT Subsystem
LIMIT:LOWer <boolean>
This command enables or disables the test on the lower region.
The limit test is applied on the trigger source only. Refer to
NOTE
<character_data>"
Syntax
Example
LIMIT:LOW ON
Query
LIMIT:LOWer?
This query enters a 1 or 0 into the output buffer indicating the state of the lower
limit test.
– 1 is returned when the lower limit test is enabled
– 0 is returned when the lower limit test is disabled
Query example
LIMIT:LOW?
394
on page 221.
LIMIT
:LOW
This command enables the lower limit test.
Queries whether the lower limit test is enabled or disabled.
Space
0|OFF
1|ON
?
Keysight 8990B Programming Guide
"TRIGger:SOURce
Advertisement
Table of Contents
