10
MULTIPULse Subsystem
MULTIPULse:GOTOFRAME <numeric_value>
This command displays the selected multipulse frame.
Syntax
Parameter
Item
numeric_value
Example
MULTIPUL:GOTOFRAME 20
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to set this
setting." will occur.
286
:GOTOFRAME
MULTIPUL
Description/Defaul t
A numeric value for the multipulse frame:
– Default value: 1
– Minimum value: 1
– Maximum value: Available frame.
Space
numeric_value
?
This command displays frame 20 of the
multipulse.
Keysight 8990B Programming Guide
Range of values
1 to available frame