Trs - Keysight 8990B Programming Manual

3 Root Commands

TRS?

This query enters a 1 or 0 into the output buffer indicating the current state of the
trigger event of the 8990B.
– 1 is returned if a trigger event occurs
– 0 is returned if there is no trigger event
Syntax
Example
TRS?
Remark
Executing this query or
be reset when the Trigger Event bit of the
the STATus:OPERation[:EVENt]? query.
76
?
TRS
Queries the state of the trigger event of the 8990B.
*CLS clears the trigger event status. This status bit will not
Operation Status register
Keysight 8990B Programming Guide
is read using