Table of Contents
Advertisement
SERVice:CSOUrce:INTerval <numeric_value>
This command sets the time interval for the reference check source.
Syntax
SERV
Parameter
Item
numeric_value
Example
SERV:CSOU:INT 20
Remark
If you set a check source interval value which exceeds its minimum or maximum
limit, the value will be clipped to its minimum or maximum value respectively.
Error –222,"Data out of range;Value clipped to minimum (#)" or –222,"Data out of
range;Value clipped to maximum (#)" will occur.
Reset condition
On reset, the reference check source interval is set to 10 min.
Keysight 8990B Programming Guide
:CSOU
Description/Defaul t
A numeric value in minute for the check source interval:
– Default value: 10 min
– Minimum value: 1 min
– Maximum value: 60 min
Space
:INT
This command sets the reference check source
interval to 20 min.
SERVice Subsystem
numeric_value
?
Range of values
1 min to 60 min
21
515
Advertisement
Table of Contents
