Acquire:ccdf:frame <Numeric_Value - Keysight 8990B Programming Manual

4 ACQuire Subsystem
ACQuire:CCDF:FRAMe <numeric_value>
This command sets the CCDF frame.
The CCDF frame can only be set when the CCDF triggered sweep mode is
NOTE
enabled (refer to
Syntax
Parameter
Item Description/Defaul t
numeric_value A numeric value for the CCDF frame:
– Default value: 1
– Minimum value: 1
– Maximum value: 1G
The range of values above is determined by CCDF trigger duration × CCDF
frame and must be ≤ 100 s.
Example
ACQ:CCDF:FRAM 2K
92
"ACQuire:CCDF:SWEep <character_data>"
ACQ :CCDF
Space
:FRAM
This command sets the CCDF frame to 2K.
Keysight 8990B Programming Guide
on page 119).
numeric_value
?
Range of values
1 to 1 G