Marker:mode <Character_Data - Keysight 8990B Programming Manual

MARKer:MODE <character_data>
This command sets the marker measurement mode.
Syntax
Parameter
Item
character_data
Keysight 8990B Programming Guide
MARK :MODE
Description/Defaul t
Sets the marker measurement mode as:
– OFF: Disables marker measurement. This is the default setting.
– DELay: Enables marker delay measurement between two traces.
– SPACing: Enables marker spacing measurement between two
pulses.
– FLOAt: Enables free float placement of the marker.
– MEASure: Enables the tracking of the measurement using markers.
– WAVeforms: Enables the tracking of the waveforms using markers.
Space character_data
?
MARKer Subsystem
Range of values
OFF
DELay
SPACing
FLOAt
MEASure
WAVeforms
11
321