Display:track <Boolean - Keysight 8990B Programming Manual

16 DISPlay Subsystem
DISPlay:TRACk <boolean>
This command enables or disables the waveform data to be displayed as a region
containing minimum and maximum traces. If disabled, the waveform data is
displayed as a normal trace.
Syntax
Example
DISP:TRAC 1
Reset condition
On reset, the waveform data is displayed as a normal trace.
Query
DISPlay:TRACk?
This query enters a 1 or 0 into the output buffer indicating the state of the
maximum and minimum traces tracking region display.
– 1 is returned when the tracking region is enabled
– 0 is returned when the tracking region is disabled
Query example
DISP:TRAC?
454
DISP :TRAC
This command enables the waveform data to be displayed
as a region containing minimum and maximum traces.
Queries whether the tracking region for maximum and
minimum traces is turned on or off.
Space
0|OFF
1|ON
?
Keysight 8990B Programming Guide