Calibration:calibrate:auto:notify <Boolean - Keysight 8990B Programming Manual

CALibration:CALibrate:AUTO:NOTify <boolean>
This command sets the state of the display notification for the auto calibration
performed on channels 1 and 4.
Syntax
Example
CAL:CAL:AUTO:NOT 1
Query
CALibration:CALibrate:AUTO:NOTify?
This query enters a 1 or 0 into the output buffer indicating the state of the display
notification for auto calibration on channels 1 and 4.
– 1 is returned when the auto calibration display notification is enabled
– 0 is returned when the auto calibration display notification is disabled
Query example
CAL:CAL:AUTO:NOT?
Keysight 8990B Programming Guide
CAL :CAL
:NOT
:AUTO
This command enables the display notification
for auto calibration on channels 1 and 4.
Queries whether display notification for auto
calibration on channels 1 and 4 are enabled or
disabled.
CALibration Subsystem
Space
0|OFF
1|ON
?
5
151