Acquire:droop[:State] <Boolean - Keysight 8990B Programming Manual

4 ACQuire Subsystem
ACQuire:DROop[:STATe] <boolean>
This command sets the state of the droop measurement mode.
Syntax
Example
ACQ:DRO 1
Remark
This command is only applicable when the selected channel is enabled. If the
channel is disabled, error –221,"Settings conflict; Requires channel # to be
enabled" will occur.
Query
ACQuire:DROop[:STATe]?
This query enters a 1 or 0 into the output buffer indicating the state of the droop
measurement mode.
– 1 is returned when the droop measurement mode is turned on
– 0 is returned when the droop measurement mode is turned off
Query example
ACQ:DRO?
128
:DRO
ACQ
This command turns on the droop measurement mode.
Queries whether the droop measurement mode is turned on
or off.
Space
:STAT
Keysight 8990B Programming Guide
0|OFF
1|ON
?