Table of Contents
Advertisement
5
CALibration Subsystem
CALibration:CALibrate <character_data>
This command sets the 8990B to manually perform calibration on
channel 1 or 4.
Syntax
Parameter
Item
character_data
Example
CAL:CAL CHAN1
Remark
This command is only applicable for channels 1 and 4. If a channel other than
channel 1 or 4 is specified, error 700,"Applicable to channel 1 and 4 only" will
occur.
146
CAL
:CAL
Description/Defaul t
Sets the channel calibration as:
– CHAN1: Sets channel 1 to calibrate.
– CHAN4: Sets channel 4 to calibrate.
Space
character_data
This command sets the 8990B to perform calibration on
channel 1.
Range of values
CHAN1
CHAN4
Keysight 8990B Programming Guide
Advertisement
Table of Contents
