21
SERVice Subsystem
SERVice:CSOUrce[:STATe] <boolean>
This command sets the state of the reference check source.
Syntax
Example
SERV:CSOU ON
Reset condition
On reset, the reference check source is turned off.
Query
SERVice:CSOUrce[:STATe]?
This query enters a 1 or 0 into the output buffer indicating the state of the
reference check source.
– 1 is returned when the check source is turned on
– 0 is returned when the check source is turned off
Query example
SERV:CSOU?
512
:CSOU
SERV
This command turns on the reference check source.
Queries whether the reference check source is turned on
or off.
Space
:STAT
Keysight 8990B Programming Guide
0|OFF
1|ON
?