Trigger:pwidth <Mode>,<Time1>,<Time2 - Keysight 8990B Programming Manual

TRIGger:PWIDth <mode>,<time1>,<time2>
This command sets the mode and time for the pulse width trigger.
Syntax
TRIG
Parameter
Item Description/Defaul t
mode Specifies the pulse width trigger mode as:
– LESS: Sets the pulse width mode to less. Only time1 is required.
– MORE: Sets the pulse width mode to more. This is the default
– WITHIN: Sets the pulse width mode to within. Time 1 and time 2
– OUTOF: Sets the pulse width mode to out. Time 1 and time2 are
time1 A numeric value for the pulse width.
time2
Default:
Example
TRIG:PWID LESS,0.1
Reset condition
On reset, the pulse width trigger mode is set to MORE and the time is set to 1 μs.
Keysight 8990B Programming Guide
Space
:PWID
setting. Only time1 is required.
are required.
required.
1 μs
mode
,
?
This command sets the pulse width trigger mode
to less at 0.1 s.
TRIGger Subsystem
time1 time2
,
Range of values
LESS
MORE
WITHIN
OUTOF
60 ns to 500 ms
8
219