Acquire:ccdf:gaussian[:State] <Boolean - Keysight 8990B Programming Manual

ACQuire:CCDF:GAUSsian[:STATe] <boolean>
This command sets the state of the CCDF Gaussian trace.
Syntax
Example
ACQ:CCDF:GAUS 1
Remarks
– This command is only applicable for channels 1 and 4. If you send this
– This command is only applicable in the CCDF acquisition mode. If the
Reset condition
On reset, the CCDF Gaussian trace is turned on.
Keysight 8990B Programming Guide
ACQ
:CCDF
command for a channel other than 1 or 4, error 700,"Applicable to channel 1
and 4 only" will occur.
acquisition mode is not set to CCDF, error –221,"Settings conflict;Requires
CCDF mode to be enabled" will occur. Refer to
<character_data>"
:GAUS :STAT
This command turns on the CCDF Gaussian trace.
on page 132 to set the acquisition mode.
ACQuire Subsystem
Space
0|OFF
1|ON
?
"ACQuire:MODE
4
95