Table of Contents
Advertisement
TRIGger:OUTput <boolean>
This command sets the state of the output trigger.
Syntax
TRIG
Example
TRIG:OUT ON
Reset condition
On reset, the output trigger is turned on.
Remark
This command is only applicable for the channel 1, channel 4, and auxiliary trigger
sources only. If this command is sent for a trigger source other than any of these
sources, error 702,"Applicable to trigger source for channel 1, 4 and auxiliary only"
will occur.
Keysight 8990B Programming Guide
Space
:OUT
This command turns on the output trigger.
TRIGger Subsystem
0|OFF
1|ON
?
8
217
Advertisement
Table of Contents
