Function{1|2|3|4}:{Vdc|Idc|Pin|Pout} <Character_Data>[,<Numeric_Value>] - Keysight 8990B Programming Manual

12 FUNCtion Subsystem
FUNCtion{1|2|3|4}:{VDC|IDC|PIN|POUT}
<character_data>[,<numeric_value>]
This command sets the source for each of the source term. This is an alternative
SCPI command to change the source wihout using SCPI commands with operand.
– Prior to sending this command, you need to set the math function to operation
NOTE
– VDC is voltage supplied, IDC is current supplied, PIN is the power input for
– <numeric_value> for this command is an optional parameter, which is used
Syntax
1
FUNC
2
3
4
368
to PAE2. Refer to "FUNCtion{1|2|3|4}:PAE2 <character_data>,<character_data>,
<character_data>,<character_data>,<numeric_value>, <numeric_value>"
page 352.
PAE2, and POUT is the power output for PAE2.
for setting VDC, IDC, PIN, or POUT as CONStant.
Space
:VDC
:IDC
:PIN
:POUT
character_data
,
Keysight 8990B Programming Guide
numeric_value
?
on