Multipulse:backward - Keysight 8990B Programming Manual

10 MULTIPULse Subsystem

MULTIPULse:BACKWARD

This command sets the selected multipulse frame to the previous frame.
Syntax
Example
MULTIPUL:BACKWARD
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to set this
setting." will occur.
280
:BACKWARD
MULTIPUL
This command sets the multipulse backward by one
frame.
Keysight 8990B Programming Guide