Timebase:offset <Numeric_Value - Keysight 8990B Programming Manual

TIMebase:OFFSet <numeric_value>
This command sets the time interval between the trigger event and delay
reference point.
Syntax
Parameter
Item
numeric_value
Example
TIM:OFFS 0.05
Keysight 8990B Programming Guide
TIM
:OFFS
Description/Defaul t
A numeric value in second for the timebase offset:
– Default value: 0 s
– Minimum value:
– –1 s
– –10 μs (only applicable when ETS is turned on)
– Maximum value:
– 1 s
– 10 μs (only applicable when ETS is turned on)
The range of values will change according to the zoom scale you set in
ACQuire:ZOOM:SCALe <numeric_value>.
Space
numeric_value
?
This command sets the timebase offset to 0.05 s.
TIMebase Subsystem
Range of values
– –1 s to 1 s
– –10 μs to 10 μs (only
applicable when ETS is
turned on)
7
191