Disk:load <String>[,<Character_Data>] - Keysight 8990B Programming Manual

18 DISK Subsystem
DISK:LOAD <string>[,<character_data>]
This command loads/recalls a saved instrument setup or waveform from the
specified file into the 8990B memory slot.
Syntax
Parameters
Item Description/Defaul t
string Sets the file name to recall from as a string value (""):
– The setup file name can be specified as a full path, for example,
"c:\wave\xyz.xml".
– The waveform file name can be specified as a full path, for example,
"c:\wave\xyz.csv", or only the file name, "xyz.csv".
– The default file directory is the working directory where the 8990B software
resides.
Assigns the memory slot to load the file into as:
[a]
character_data
– WMEM1: To load the file into memory slot 1.
– WMEM2: To load the file into memory slot 2.
– WMEM3: To load the file into memory slot 3.
– WMEM4: To load the file into memory slot 4.
This is an optional parameter. If no memory slot is specified, NONE will
be used.
[a] This parameter is only applicable for loading a saved waveform from the specified file into the 8990B memory slot.
[b] Memory slot 1 will be assigned when NONE is used.
472
:LOAD
DISK
Space
string
Keysight 8990B Programming Guide
character_data
,
Range of values
–
WMEM1
WMEM2
WMEM3
WMEM4
[b]
NONE