Xydisplay:reference:state <Boolean - Keysight 8990B Programming Manual

XYDISPlay:REFerence:STATe <boolean>
This command enables or disables the XY reference trace.
Syntax
XYDISP
Example
XYDISP:REF:STAT ON
Remark
This command is only applicable in the XYDISPlay acquisition mode. If the
acquisition mode is not set to XYDISPlay, error –221,"Settings conflict;Requires
XY display mode to be enabled" will occur. Refer to
<character_data>"
Reset condition
On reset, the XY reference trace is disabled.
Keysight 8990B Programming Guide
:STAT
:REF
This command displays the XY reference trace.
on page 132 to set the acquisition mode.
XYDISPlay Subsystem
Space
0|OFF
1|ON
?
"ACQuire:MODE
17
463