Multipulse:acquire:frame - Keysight 8990B Programming Manual

MULTIPULse:ACQuire:FRAMe

This command acquires the frames in the multipulse mode.
Syntax
Example
MULTIPUL:ACQ:FRAM
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to set this
setting." will occur.
Keysight 8990B Programming Guide
:ACQ
MULTIPUL
:FRAM
This command acquires the frames in the
multipulse mode.
MULTIPULse Subsystem 10
277