Multipulse:forward - Keysight 8990B Programming Manual

MULTIPULse:FORWARD

This command sets the selected multipulse frame to the next frame.
Syntax
Example
MULTIPUL:FORWARD
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to set this
setting." will occur.
Keysight 8990B Programming Guide
:FORWARD
MULTIPUL
This command sets the multipulse forward by one
frame.
MULTIPULse Subsystem 10
283