Acquire:ccdf:marker:ydelta - Keysight 8990B Programming Manual

4 ACQuire Subsystem

ACQuire:CCDF:MARKer:YDELta?

This query returns the Y-axis delta value between the CCDF A and B markers.
Syntax
Example
ACQ:CCDF:MARK:YDEL?
Remarks
– This query is only applicable for channels 1 and 4. If you send this query for a
– This query is only applicable in the CCDF acquisition mode. If the acquisition
108
ACQ
:CCDF
channel other than 1 or 4, error 700,"Applicable to channel 1 and 4 only" will
occur.
mode is not set to CCDF, error –221,"Settings conflict;Requires CCDF mode to
be enabled" will occur. Refer to
page 132 to set the acquisition mode.
:MARK
:YDEL
Queries the CCDF marker Y-axis delta value.
"ACQuire:MODE <character_data>"
Keysight 8990B Programming Guide
?
on