Channel{1|4}:Fdoffset[:State] <Boolean - Keysight 8990B Programming Manual

CHANnel{1|4}:FDOffset[:STATe] <boolean>
This command sets the state of the frequency-dependent offset (FDO) table
selected in
Syntax
Example
CHAN1:FDO OFF
Remarks
– If there is no FDO table selected when sending this command, error
– This command is only applicable for channels 1 and 4. If a channel other than
Keysight 8990B Programming Guide
CHANnel{1|4}:FDOffset:SELect <string>
1
CHAN
4
–221,"Settings conflict;No FDO table selected" will occur.
channel 1 or 4 is specified, error 700,"Applicable to channel 1 and 4 only" will
occur.
:FDO :STAT
This command disables the FDO table for channel 1.
CHANnel Subsystem
for the specified channel.
Space
0|OFF
1|ON
?
6
165