Multipulse:acquire:status - Keysight 8990B Programming Manual

10 MULTIPULse Subsystem

MULTIPULse:ACQuire:STATus?

This query enters a 1 or 0 into the output buffer indicating the state of the
multipulse acquisition.
– 1 is returned when the multipulse acquisition is completed.
– 0 is returned when the multipulse acquisition is still acquiring.
Syntax
MULTIPUL
Example
MULTIPUL:ACQ:STAT?
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to query this
data" will occur.
278
:ACQ :STAT
?
Queries the multipulse completion status.
Keysight 8990B Programming Guide