Marker:ayposition <Numeric_Value - Keysight 8990B Programming Manual

MARKer:AYPosition <numeric_value>
This command sets the Y-axis position of marker A in the free float mode. The
MARKer:AYPosition command will place the marker A horizontal line over the
input value, and the marker A vertical line will disappear. The query command will
return the Y-axis position of the marker A.
To search for the corresponding points based on the input Y, use the marker
searching feature (refer to
Prior to sending this command, you need to set the marker measurement mode
NOTE
to FLOAt (refer to
Syntax
Parameter
Item
numeric_value
Example
MARK:AYP 0.1
Keysight 8990B Programming Guide
"MARKer:MODE <character_data>"
:AYP
MARK
Description/Defaul t
A numeric value for the Y-axis position
"MARKer:AYSEARCH <numeric_value>"
Space
numeric_value
?
This command sets the Y-axis position of marker A to 0.1.
MARKer Subsystem
on page 319).
on page 321).
11
301