Table of Contents
Advertisement
:PTRansition <NRf>|<non-decimal numeric>
This command is used to set the Positive Transition register of the SCPI register
set you require to control. The first 15 bits of the input parameter are written into
the Positive Transition register of the specific SCPI register set. The last bit (bit 15)
is always set to 0.
Syntax
Parameter
Item
NRf
non-decimal numeric
Query
:PTRansition?
This query returns a 15-bit decimal-weighted number representing the contents
of the Positive Transition register of the SCPI register set being queried. The return
format is <NR1> in the range of 0 to 32767 (2
Keysight 8990B Programming Guide
Space
:PTR
Description
The value used to set the PTR register
NRf
non-decimal numeric
?
15
–1).
STATus Subsystem
Range of values
15
0 to 2
–1
15
439
Advertisement
Table of Contents
