Function{1|2|3|4}:Multiply <Character_Data>,<Character_Data> [,<Numeric_Value>] - Keysight 8990B Programming Manual

12 FUNCtion Subsystem
FUNCtion{1|2|3|4}:MULtiply <character_data>,<character_data>
[,<numeric_value>]
This command sets the source for the multiply operation. The multiply operation
multiplies two sources point by point.
– If the source(s) input is in the log scale, it will be converted to the linear scale
NOTE
– If the trace length between the channels is not equal, the waveform math
– If the number of trace points is not equal, the waveform math operation will
Syntax
1
FUNC
2
3
4
346
to perform the multiply math operation. The resultant trace will have the
undefined (UDF) unit.
operation will find the shortest trace between the sources and shrink other
traces to an equal length.
add trace points by using the PCHIP method.
Space
:MUL character_data
,
Keysight 8990B Programming Guide
character_data
numeric_value
,