Table of Contents
Advertisement
CHANnel{1|2|3|4}[:DISPlay] <boolean>
This command sets the state of the display for the specified channel.
Syntax
Example
CHAN3 OFF
Remarks
– If there is no signal at a particular channel, the display of that channel will be
– If no sensor is connected to a particular channel, error –241,"Hardware
Reset condition
On reset, the channel display is turned on.
Keysight 8990B Programming Guide
1
CHAN
2
3
4
turned off even if its display state is set to on.
missing;Unable to turn on channel #;no sensor detected" will occur.
Space
:DISP
This command turns off the display for channel 3.
CHANnel Subsystem
0|OFF
1|ON
?
6
161
Advertisement
Table of Contents
