Disk Drive Interconnect - Keysight Technologies X Series Service Manual

Exa signal analyzer, 9 khz - 3.6/7/13.6/26.5/32/44 ghz

Hide thumbs Also See for X Series:

Table of Contents

Assembly Replacement Procedures

Disk Drive Interconnect

1. Remove the A5 Disk Drive assembly for the instrument. Refer to the

2. Remove the A4 CPU assembly from the instrument. Refer to the

Figure 15-73

A4A1 Disk Drive Interconnect Board Removal

Keysight N9010A EXA Service Guide

removal procedure.

removal procedure.

15-73. Remove the A4 CPU assembly cover (1) by first

removing the 19 flat-head screws (2) and 3 pan-head screws (3). The 19

flat-head screws need to be discarded and replaced since they are

precoated with a thread locking compound and new screws will need to be

used when the cover is re-installed.