Low Band Switch; Standard Instruments With Serial Number < My/Sg50510001 - Keysight Technologies X Series Service Manual

Assembly Replacement Procedures
RF Area (Option 503, 507, 513, 526)

Low Band Switch -

Standard Instruments with Serial Number < MY/SG50510001
Removal
1. Refer to
2. Remove the semi-rigid cables W3, W8, and W9 using the 5/16 inch
W8 will not be present in instruments with Option 503.
3. Remove the two screws (2) using the T-10 driver. The low band switch
Keysight N9010A EXA Service Guide
Figure 15-10. Remove the ribbon cable W18.
wrench.
(1) can now be removed from the chassis.
477