Keysight Technologies X Series Service Manual page 623

Post-Repair Procedures
Post-Repair Procedures
1. Press Enter to proceed with the Windows XP setup.
2. When you see the Windows XP Setup Wizard screen as seen in
Figure 16-22 Windows XP Setup Wizard
3. When the Windows XP License Agreement window comes up, select "I
4. The Date and Time Settings screen is used to set the appropriate date,
5. Wait for the Windows XP Setup Wizard to complete. The instrument will
6. Once the Windows XP Setup Wizard has completed the instrument is
Keysight N9010A EXA Service Guide
16-22, press Enter to move to the License Agreement screen.
accept this agreement" and press Next.
time and time zone. These settings will be configured later by the end
user.
Select Next to continue the Windows XP Setup Wizard.
restart itself a few times.
ready for the next step of configuration.
Figure
623