Keysight Technologies X Series Service Manual page 609

Post-Repair Procedures
Post-Repair Procedures
Enabling Spread Spectrum
1. Press the Left Arrow on the external keyboard to highlight the Advanced
Figure 16-9 Advanced Tab Highlighted
2. Press the Down Arrow on the external keyboard to highlight CK-408
3. Use the "+" key on the external keyboard to change the setting from
4. Press "F10" on the keyboard to save changes and exit.
Keysight N9010A EXA Service Guide
tab as shown in Figure
Spread Spectrum
[Disabled] to [Enabled]
16-9.
609