Keysight Technologies X Series Service Manual page 491

Assembly Replacement Procedures
RF Area (Option 503, 507, 513, 526)
8. Refer to
Figure 15-20 Removing Coax Cables
9. Refer to
Figure 15-21 Low Band Switch/Bracket Removal
Keysight N9010A EXA Service Guide
Figure 15-20. Remove the semi-rigid cables W3, W9, and W10.
Figure 15-21. Using the T-10 driver, remove the two screws (1) to
separate the low band switch/bracket from the chassis.
491