Keysight Technologies X Series Service Manual page 619

Post-Repair Procedures
Post-Repair Procedures
High-Performance Celeron/Dual-Core Processor
Save Changes
1. Press "F3" on the external keyboard to select Optimized Defaults. A dialog
Figure 16-19 Selecting Optimized Defaults
1. Press the right arrow on the external keyboard to select the "Save and
2. Press the down arrow key to select "Save Changes and Exit" as shown in
3. Press the Enter key again to confirm.
Keysight N9010A EXA Service Guide
box will appear asking you to confirm your selection. Select "Yes" and
press the Enter key on the external keyboard.
Exit" tab.
"Save Changes". Press the Enter key.
619