Keysight Technologies X Series Service Manual page 543

Exa signal analyzer, 9 khz - 3.6/7/13.6/26.5/32/44 ghz

Hide thumbs Also See for X Series:

Table of Contents

Assembly Replacement Procedures

1. Turn the instrument off and remove the AC power cord.

15-64. Locate and remove the existing disk drive carrier

assembly (2) from the instrument by loosening the rear panel screw (1).

Figure 15-64

Removing the Disk Drive Carrier Assembly

Keysight N9010A EXA Service Guide

Troubleshooting