Tools You Will Need; Adjustments Tests After An Instrument Repair - Keysight Technologies X Series Service Manual

Assembly Replacement Procedures

Tools you will need

Tools you will need
Figure 15-1 TORX Tool
TORX Hand Driver - Size T-10
TORX Hand Driver - Size T-20
9/16 inch nut driver
5/16 inch open-end wrench
cable puller

Adjustments Tests after an instrument repair

Refer to
If one or more instrument assemblies have been repaired or replaced, perform
the related adjustments and performance verification tests.
Keysight N9010A EXA Service Guide
Description
Table 16-1 on page 595
Keysight Part Number
8710-1623
8710-1615
8720-0008
source locally
5021-6773
for information about post-repair procedures.
465