Keysight Technologies X Series Service Manual page 131

Instrument Messages
Condition Errors 301 to 399, Uncalibrated Integrity
311
Calibration; ENR table
extrapolated
311
Calibration; No ENR data
present
313 unused bit6 is set
315 unused bit7 is set
317 unused bit8 is set
319 unused bit9 is set
321 unused bit10 is set
323 unused bit11 is set
325 unused bit12 is set
327 unused bit13 is set
329 unused bit14 is set
Keysight N9010A EXA Service Guide
W One or more calibration or measurement
frequency points exceed the currently loaded Cal
or Meas ENR Table frequency ranges. The
corresponding ENR table's lowest frequency ENR
value will be re-used for frequencies less than the
table range, and the highest frequency ENR value
will be re-used for frequencies greater than the
table range.
(~ENR)
W No ENR Data (ENR)
W
W
W
W
W
W
W
W
W
131