Keysight Technologies X Series Service Manual page 36

Overview
Service Equipment You Will Need
Table 1-1 Required Test Equipment
Instrument
Type-N (m) to 3.5 mm (f)
(2 Required)
3.5 mm (f) to Type-N (f)
(for 3.5 mm source)
Type-N (f) to 3.5 mm (m) Frequency: DC to 18 GHz
3.5 mm (f) to 3.5 mm (f)
(for 3.5 mm source)
3.5 mm (m) to 3.5 mm
(m)
(2 Required)
3.5 mm (f) to 2.4 mm (f)
(for 2.4 mm source)
Type-N (f) to 2.4 mm (f)
(for 2.4 mm source)
Type-N (f) to 2.4 mm (f)
(for 2.4 mm source)
BNC (m) to SMA(f)
BNC Tee (BNC f,m,f)
SMB (f) to BNC (f)
BNC (f) to SMA (m)
BNC (f) to Dual Banana
3.5 mm (f) to Type-N (m) Shipped with the 8485A for adapting to the
2.4 mm (f) to Type-N (m) Shipped with the 8487A for adapting to the
Type-N Tee
Optional Equipment
10 MHz Distribution
Amplifier
(only needed when using
the 10 MHz Distribution
Amplifier Setup)
36
Critical Specifications
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
VSWR: ≤ 1.14:1
Frequency: DC to 26.5 GHz
VSWR: ≤ 1.05:1
Frequency: DC to 26.5 GHz
VSWR: ≤ 1.12:1
Frequency: DC to 26.5 GHz
VSWR: ≤ 1.05:1
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
Frequency: DC to 1.3 GHz
VSWR: ≤ 1.13:1
Frequency: DC to 1.3 GHz
Frequency: DC to 1.3 GHz
Power Reference. Only to be used for power
sensor cal.
Power Reference. Only to be used for power
sensor cal.
Recommended Al ternative
Model
a
Model
1250-1744
1250-1745
1250-1750
83059B 1250-1749
83059A 1250-1748
11901B
11903B
11903D
1250-1700
1250-0781
1250-1236
1250-1200
1251-2277
08485-60005
08487-60001
1250-0559
Symmetricom Keysight 5087A
5087B
Keysight N9010A EXA Service Guide
b
Use
P
A, P
A, P
P
P
P
P
P
P
A, P
A, P
A, P
A, P
A, P
A, P
P
A, P