Keysight Technologies X Series Service Manual page 590

Assembly Replacement Procedures
Front Frame Assembly
Figure 15-98 LED and Display Bracket Separation
Replacement
1. Refer to
2. Replace the screw(3) that secures the display bracket to the Front Frame
3. Replace the front panel shield.
590
Figure 15-97. Place the display bracket into position in the Front
Frame Assembly. Reconnect the flex circuit A1W1 (1) and A1W3 (2) to
the front panel interface board (4).
Assembly. Torque to 9 inch-pounds.
Keysight N9010A EXA Service Guide