INVT Goodrive3000 GD3000-01-055G-12 Operation Manual page 92

Goodrive3000 series medium voltage inverters
The running direction is:
Sln
ON
ON
ON→OFF
SIn: 3-wire running control, FWD: forward running, REV: reverse running
3: 3-wire control 2: SIn is the enabling terminal defined by the mode, the running command is caused by
FWD or REV and both of them control the running direction. When the inverter runs, SIn needs to be in
the closed state. FWD or REV generates a rising-edge signal to control the running and direction of the
inverter. When the inverter stops, SIn needs be disconnected.
Sln
ON
ON
ON→OFF
SIn: 3-wire running control, FWD: forward running, REV: reverse running
Note: For the 2-wire running mode, when the FWD/REV terminal is valid, the inverter will stop
because of the stop command from other sources. Even though the FWD/REV control terminal
keeps valid, the inverter will not run when the stop command is canceled. Only when FWD/REV is
relaunched, the inverter can start again. For example, the effective STOP/RST stop at PLC single
cycle stop, fixed-length stop and terminal control (See P07.04).
Function
Name
code
S1 terminal
P05.14 switching-on delay
time
S1 terminal
P05.15
switching-off delay
SB1
FWD
SB2
SIn
REV
K
COM
Previous running
REV
Forward running
OFF→ON
Reverse running
Reverse running
ON→OFF
Forward running
ON
OFF
SB1
FWD
SB2
SIn
REV
SB3
COM
FWD
OFF→ON
ON
OFF
Detailed instruction of parameters
0.000~50.000s
0.000~50.000s
-91-
Goodrive3000 series converter
Current running direction
direction
Decelerate to stop
REV
ON
OFF
OFF→ON
Setting range
0.000~50.000
0.000~50.000
Reverse running
Forward running
Forward running
Reverse running
Running direction
Forward running
Forward running
Reverse running
Reverse running
Decelerate to stop
Default
value
0.000s
0.000s