INVT Goodrive3000 GD3000-01-055G-12 Operation Manual page 103

Goodrive3000 series medium voltage inverters
P07 Group Human-machine interface
Function
Name
code
P07.00 User password
The password protection will be valid when setting any non-zero number.
00000: Clear the previous user password and make the password protection invalid.
After the user password becomes valid, if the password is incorrect, the user cannot enter the parameter
menu. Only correct password can make the user check or modify the parameters. Please remember the
user password.
Retreat the editing state of the function code and the password protection will become valid in 1 minute. If
the password is available, press PRG/ESC to enter the editing state of the function code, and then
"0.0.0.0.0" will be displayed. Unless inputting the correct password, the user can not enter it.
Note: Restoring to the default value may clear the user password, so please use it with caution.
Function
Name
code
P07.01 Parameter copy
The function code determines the function parameter copy mode.
Note: After completing the 1~4 operations, the parameter will come back to 0 automatically, and
the functions of upload and download exclude the factory parameters of P29.
Function
Name
code
QUICK/JOG
P07.02
function selection
Select the functions of QUICK/JOG.
Detailed instruction of parameters
0~65535
Detailed instruction of parameters
0: No operation
1: Upload the local function
parameters to the keypad
2: Download the function parameters
of the keypad to the local address
(including the motor parameters)
3: Download the function parameters
of the keypad to the local address
(excluding the motor parameters)
4: Download the function parameters
of the keypad to the local address
(only for the motor parameters)
Detailed instruction of parameters
0: No function
1: Jogging running
2: Shift the display state by the
shifting key
3: Shift between forward rotation and
reverse rotation
4: Clear UP/DOWN setting
5: Coast to stop
6: Shift the running command
sources in sequence
7: Quick commission mode
(according to the non-factory
parameter commissioning)
-102-
Goodrive3000 series converter
Default
Setting range
value
0~65535
Default
Setting range
value
0~4
Default
Setting range
value
0~7
0
0
1