INVT Goodrive3000 GD3000-01-055G-12 Operation Manual page 30

Goodrive3000 series medium voltage inverters
P06 Group Output terminals
Function
Name
code
Polarity selection of
P06.00
digital output terminal
Set the polarity of digital output terminals
If set the bit as 0, the output terminal is positive, and when set the bit as 1, the output terminal is negative.
BIT7 BIT6
Reserved Reserved
Function
Name
code
Relay RO1 output
P06.01
selection
Relay RO2 output
P06.02
selection
Above parameters can select following functions. The same output terminal functions can be selected
repeatedly.
Setting
Function
value
0 No output
1
Ready to run
2
In running
3 Fault output
4~31 Reserved
Function
Name
code
Delay time of RO1
P06.05
switching-on
Delay time of RO1
P06.06
switching-off
Delay time of RO2
P06.07
switching-on
Delay time of RO2
P06.08
switching-off
Detailed parameter description
0x0~0xF
BIT5 BIT4
Reserved Reserved
Detailed parameter description
0: No output
1: Ready to run
2: In running
3: Fault output
4~31: Reserved
No output
The rectification unit is ready
The output is valid when PWM rectifier operates
The output is valid when fault occurs to the rectification unit
Detailed parameter description
0.000~60.000s
-29-
Goodrive3000 series PWM rectifier
Setting range
BIT3 BIT2
Reserved Reserved
Setting range
Description
Setting range
0.000~60.000
Default
0x0~0xF 0x00
BIT1 BIT0
RO2 RO1
Default
1
0~31
2
Default
0.000s
0.000s
0.000s
0.000s