Configuring The Visual Message Function - Canon imageRUNNER ADVANCE C5560i III User Manual

Visual Message

Configuring the Visual Message Function

The Visual Message function enables you to display simple content and messages on the touch panel display.
Displaying messages from the administrator or event notifications, etc. on the touch panel display enables the
machine to be used as an information sharing tool in the office.
● When the Visual Message function is set, content can be checked from <Visual Message> on the Home,
regardless of the timing. The last content displayed is displayed.
● Set a file saved on a file server or in an Advanced Box on the same network as the content to display.
Using as a Simple File Server(P. 574)
● You can also set a website on the internet as the content via a proxy server. The proxy settings used for this
function are the same as the settings in
● The content is displayed when printing starts if the forced hold print function is enabled and the [Display
When Print Job Starts] check box is selected.
1
Start the Remote UI.
2
Click [Settings/Registration] on the portal page.
3
Click [License/Other]
4
Set the display timing and content.
Managing the Machine
<Proxy Settings>(P. 1057) .
Starting the Remote UI(P. 784)
[Visual Message Settings]
857
Remote UI Screen(P. 785)
[Display Settings].
4XR3-0FF