Canon imageRUNNER ADVANCE C5560i III User Manual page 1324

◼
#010
Paper has run out.
● Load paper.
Loading Paper(P. 116)
◼
#011
The document to send was not placed correctly.
● Place the original correctly and try sending again from the start of the procedure.
◼
#012
Could not send because the device of the other party does not have any paper.
● Tell the other party to load paper.
◼
#018
There was no response when redialing.
● Check that the other party can communicate, and redial again.
Could not send because the other party was making a call, etc.
● Check that the other party can communicate, and try sending again.
Could not send because the settings of the device of the other party do not match.
● Check the settings of the other party, and try sending again.
◼
#019
When sending a fax from a remote fax client machine, sending could not be performed because the
memory of the remote fax server machine became full.
● Try sending again after the other sending to the remote fax server machine is complete.
● Delete unnecessary documents and error documents from the remote fax server machine to free up
space.
The document could not be sent because the memory of the machine is full.
● Delete unnecessary documents and documents with errors to make more memory available.
When performing memory sending, the image could not be stored in the memory.
● Perform memory sending again.
● Send the document with direct sending.
There was a problem with the scanned image when performing direct sending.
● Perform direct sending again.
◼
#022
Forwarding could not be performed because the content of the group destination specified as the
forwarding destination was deleted or only included a Mail Box.
Troubleshooting
1310