Canon imageRUNNER ADVANCE C5560i III User Manual page 415

● If the size displayed in <Original Size> is different from the size of the original, press <Change> to
select the size. You can only set the Erase Original Frame mode for the original sizes shown on the
touch panel display.
2
Enter the width of the frame to erase.
Erasing dark borders in copies of books
You can erase the dark borders both in the center and contour lines that appear when you scan facing pages
in a book.
1
Press <Erase Book Frame> and check <Original Size>.
● If the size displayed in <Original Size> is different from the size of the book, press <Change> to select
the size. You can only set the Erase Book Frame mode for the original sizes shown on the touch panel
display.
2
Press <Center> or <Sides> and enter each erasing width.
Erasing punch holes in copies of documents
1
Press <Erase Binding> and select the punch hole location.
2
Enter the erasing width.
● If you want to adjust the width for each border independently, press <Erase Original Frame> or
<Erase Book Frame>, and then press <Adjust Independently> to enter the erasing widths.
● If you are using <Erase Binding>, the borders you do not select are also erased by 4 mm.
Faxing
401