Canon imageRUNNER ADVANCE C5560i III User Manual page 694

Check the login service.
●
Configure the authentication server settings.
●
Select the user authentication system.
Computer(P. 710)
● Make sure to log out after you finish using the Remote UI. If you close the Remote UI without logging out, it
may take a long time to log in next time.
● If you want to limit authentication method to User Authentication (restrict use of System Manager ID for
authentication) when the machine is accessed from a device management software or driver, make sure to
set <Prohibit Authentication Using Department ID and PIN> to <On>.
Department ID and PIN>(P. 1146)
Managing the Machine
Log in to the Remote UI with Administrator privileges, click [Settings/Registration]
[User Management] [Authentication Management]
Information], and check that the login service is indicated as User Authentication.
Register user information on the local device and specify the authentication server.
Registering User Information in the Local Device(P. 681)
Registering Server Information(P. 695)
Configuring the Authentication Functions(P. 701)
Using Personal Authentication to Manage Printing/Faxing/Remote Scanning via a
<Prohibit Authentication Using
680
[Authentication Service