Canon imageRUNNER ADVANCE C5560i III User Manual page 1099

● When the remote scanner function is enabled, you cannot use <Copy> and <Scan and Store>.
● You can specify the time period in which you are logged out and the touch panel display returns to
the default setting automatically.
<Auto Offline>
<Function Settings>
If the machine is connected to a network that is online, scanning is not possible with <Copy> or <Scan and
Store>. If you set <Auto Offline> to <On>, the machine automatically goes offline when the time set in <Auto
Reset Time> in <Preferences> (Settings/Registration) has elapsed.
● If <Auto Reset Time> is set to <0>, the machine automatically goes offline after approximately two
minutes.
● You can specify the time period in which you are logged out and the touch panel display returns to
the default setting automatically.
<Image Quality Level for Limited Color/Compact>
<Function Settings>
If you select PDF (Compact/Low Color)/XPS (Compact) as the file format when using <Scan and Send> or <Scan
and Store>, you can set the image quality level of the document.
● This setting is disabled when sending a fax or I-fax.
● If you set both <OCR (European Languages)> and <Compact> for the file format, this setting is
disabled.
● If you scan an original with many colors when <Text> is selected for the original type, the data size
and image quality will vary following compression, according to the selected image level. However, if
the original is in monochrome or has few colors, it does not matter which image level you select.
<PDF (Limited Color) Resolution Settings>
<Function Settings>
If you select PDF (Low Color) as the file format when using <Scan and Send> or <Scan and Store>, you can create
a smaller PDF file by lowering the resolution.
Settings/Registration
<Common> <Scan Settings>
<Common> <Generate File>
<Common> <Generate File>
1085